T10 Channel LED Square
with 9 x SMT LED
Size of PCB board - 40 mm square
electronic current
limiting
8-30 V DC - bi-polarity
|
An efficient replacement for incandescent lamps in situations
where the LED board can be laid directly on top of the diffused
lens.
These boards generate virtually no heat and can be fixed using double
sided tape, a small blob of silicon sealant or some other method.
In most situations they can be virtually placed directly on to the
diffused lens.
Suitable for 12v and 24vDC systems under charge.
Fitting T10 sockets are available here
Operating voltage range - 8~30vDC
Current draw at 12vDC - 190 milliamps
Luminous flux - 120 lm
Kelvin temperature - 7000 K.
Viewing Angle - 120°
Size of PCB board - 40 mm square
Total thickness of PCB including LED - 3 mm
Thickness of PCB board - 1.6 mm
|
Use
the XE.com®